您要查找的是不是:
- Keywords SBR latex;coagulation;PSBR;separating agent; 丁苯胶乳;凝聚;粉末丁苯橡胶;隔离剂;
- Using tetraalkyl ammonium chloride ( DCN ) and polymeric floc-culant TXD as coagulant in the coagulation process of cold-Polymerized SBR latex was described. 以高分子絮凝剂(TXD)为主凝剂,季铵盐(DCN)为助凝剂,对低温乳液聚合丁苯胶乳的凝聚工艺进行试验,确定了DCN与TXD的最佳配比和絮凝条件。
- Microstructure and crystalline state of hydrogenated styrene-butadiene rubber(HSBR) from hydrogenation of SBR latex were characterized by IR, DSC and TEM. 用IR,DSC,TEM表征了由丁苯胶乳氢化制备的氢化丁苯橡胶(HSBR)的微观结构及结晶状态,并测定了HSBR老化前后的力学性能。
- A starch/SBR composite was prepared by blending and co-coagulation of water solution of starch and SBR latex,and its structure and properties were investigated. 采用淀粉水溶液与丁苯胶乳共混共凝聚的方法制备淀粉/SBR复合材料,并对其结构和性能进行研究。
- Keywords high functionalize;SBR latex;coated white-board paper; 高功能化;羧基丁苯胶乳;涂布白纸板;
- It is widely recognized that ,in such cases, the particle diameter of rubber (PB latex or SBR latex) greatly governs the impact resistance and processability of the final products. 我们知道聚丁二烯(PB)胶乳或丁苯(SBR)胶乳的橡胶粒径是控制最终产品抗冲性能和加工性能的重要指标。
- The evaluation result showed that the service performance of modified asphalts with 1% to 1.5% SBR latex as well as their mixtures can fulfil the national demands and use in the construction of high grade highways. 在单家寺沥青中加入丁苯乳胶(SBR)后的改性沥青及其混合料的使用性能的评价结果表明,改性单家寺沥青的使用性能可满足“八五”国家科技攻关提出的建议值,可用于高等级公路的建设。
- Microstructure and crystalline state of hydrogenated styrene-butadiene rubber(HSBR) from hydrogenation of SBR latex were characterized by IR, DSC and TEM. Mechanical properties of the HSBR before and after thermal aging were also studied. 用IR,DSC,TEM表征了由丁苯胶乳氢化制备的氢化丁苯橡胶(HSBR)的微观结构及结晶状态,并测定了HSBR老化前后的力学性能。
- And by pre - mixing the SBR latex and NR latex before the two latices were mixed with carbon black, the blends of P (SBR/NR/HAF) showed better mechanical properties. 采用胶乳预混合的工艺制备的P(SBR/NR/HAF)具有较好的物理机械性能。
- Keywords SBR;water decanter;sewage treatment; 序批式活性污泥法;滗水器;污水处理;
- Keywords SBR;ebonite;curing time; 硬质橡胶;硫化时间;
- testing methods for synthetic rubber sbr latex 合成橡胶丁苯乳胶的试验方法
- Industrial trial of SBR latex for paving 丁苯道路胶乳工业试生产
- The Preparation of High Solid Content SBR Latex 高固含量丁苯胶乳的制备
- The manufacture methods of SBR latexes of three companies in Japan and the effects of above SBR latexes on the properties of MBS were also presented. 叙述日本MBS三大生产公司丁苯胶乳的制法及所制成之胶乳对MBS性能的影响。
- The principle of PVC modified by MBS resin and the properties of SBR latexes reeded were briefly introduced. 本文简要介绍了MBS树脂改性PVC的原理及对所用之原料丁苯胶乳特性的要求。
- Keywords SBR;fluororubber;vulcameter;Stability;reference meterail; 丁苯橡胶;氟橡胶;硫化仪;标准物质;贮存稳定性;
- Keywords SBR;NBR;polyisoprene;hydrogenation;characteristic of IR; 丁苯橡胶;丁腈橡胶;聚异戊二烯;加氢;红外表征;
- Keywords SBR Process Wastewater treatment decanting tank; 污水处理;滗水堰槽;
- Keywords SBR;endogenous respiration rate;MLSS;temperature; 内源呼吸速率;MLSS;温度;